OpenMS  2.8.0
TOPPBase.h
Go to the documentation of this file.
1 // --------------------------------------------------------------------------
2 // OpenMS -- Open-Source Mass Spectrometry
3 // --------------------------------------------------------------------------
4 // Copyright The OpenMS Team -- Eberhard Karls University Tuebingen,
5 // ETH Zurich, and Freie Universitaet Berlin 2002-2021.
6 //
7 // This software is released under a three-clause BSD license:
8 // * Redistributions of source code must retain the above copyright
9 // notice, this list of conditions and the following disclaimer.
10 // * Redistributions in binary form must reproduce the above copyright
11 // notice, this list of conditions and the following disclaimer in the
12 // documentation and/or other materials provided with the distribution.
13 // * Neither the name of any author or any participating institution
14 // may be used to endorse or promote products derived from this software
15 // without specific prior written permission.
16 // For a full list of authors, refer to the file AUTHORS.
17 // --------------------------------------------------------------------------
18 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 // ARE DISCLAIMED. IN NO EVENT SHALL ANY OF THE AUTHORS OR THE CONTRIBUTING
22 // INSTITUTIONS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
23 // EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
24 // PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
25 // OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
26 // WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
27 // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
28 // ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 //
30 // --------------------------------------------------------------------------
31 // $Maintainer: Timo Sachsenberg $
32 // $Authors: Marc Sturm, Clemens Groepl $
33 // --------------------------------------------------------------------------
34 
35 #pragma once
36 
41 
44 
46 
48 
49 #include <fstream>
50 
51 class QStringList;
52 
53 namespace OpenMS
54 {
55  class FeatureMap;
56  class ConsensusMap;
57  struct ParameterInformation;
58 
71  struct Citation
72  {
73  std::string authors;
74  std::string title;
75  std::string when_where;
76  std::string doi;
77 
79  std::string toString() const
80  {
81  return authors + ". " + title + ". " + when_where + ". doi:" + doi + ".";
82  }
83  };
84 
85  namespace Exception
86  {
88  class OPENMS_DLLAPI UnregisteredParameter :
90  {
91 public:
92  UnregisteredParameter(const char* file, int line, const char* function, const String& parameter) :
93  BaseException(file, line, function, "UnregisteredParameter", parameter)
94  {
96  }
97 
98  };
100  class OPENMS_DLLAPI WrongParameterType :
102  {
103 public:
104  WrongParameterType(const char* file, int line, const char* function, const String& parameter) :
105  BaseException(file, line, function, "WrongParameterType", parameter)
106  {
108  }
109 
110  };
112  class OPENMS_DLLAPI RequiredParameterNotGiven :
114  {
115 public:
116  RequiredParameterNotGiven(const char* file, int line, const char* function, const String& parameter) :
117  BaseException(file, line, function, "RequiredParameterNotGiven", parameter)
118  {
120  }
121 
122  };
123  }
124 
145  class OPENMS_DLLAPI TOPPBase
146  {
147 public:
148 
151  {
165  UNEXPECTED_RESULT
166  };
167 
168 
169 
171  TOPPBase() = delete;
172 
174  TOPPBase(const TOPPBase&) = delete;
175 
186  TOPPBase(const String& name, const String& description, bool official = true, const std::vector<Citation>& citations = {}, bool toolhandler_test = true);
187 
189  virtual ~TOPPBase();
190 
192  ExitCodes main(int argc, const char** argv);
193 
201  static void setMaxNumberOfThreads(int num_threads);
202 
211 
212 private:
215 
218 
221 
224 
227 
230 
233 
236 
239 
242 
244  mutable std::ofstream log_;
245 
254  void enableLogging_() const;
255 
257  std::vector<ParameterInformation> parameters_;
258 
268  virtual Param getSubsectionDefaults_(const String& section) const;
269 
278 
280  std::map<String, String> subsections_;
281 
283  std::map<String, String> subsections_TOPP_;
284 
285 
298  Param parseCommandLine_(const int argc, const char** argv, const String& misc = "misc", const String& unknown = "unknown");
299 
309  String getParamAsString_(const String& key, const String& default_value = "") const;
310 
316  Int getParamAsInt_(const String& key, Int default_value = 0) const;
317 
323  double getParamAsDouble_(const String& key, double default_value = 0) const;
324 
330  StringList getParamAsStringList_(const String& key, const StringList& default_value) const;
331 
337  IntList getParamAsIntList_(const String& key, const IntList& default_value) const;
338 
344  DoubleList getParamAsDoubleList_(const String& key, const DoubleList& default_value) const;
345 
355  bool getParamAsBool_(const String& key) const;
356 
368  const ParamValue& getParam_(const String& key) const;
369 
375  String getSubsection_(const String& name) const;
376 
379 
382 
386 
387 protected:
390 
393 
395  bool official_;
396 
398  std::vector<Citation> citations_;
399 
402 
410  const String& getIniLocation_() const
411  {
412  return ini_location_;
413  }
414 
416  const String& toolName_() const;
417 
438  virtual void registerOptionsAndFlags_() = 0;
439 
442 
444  std::vector<ParameterInformation> paramToParameterInformation_(const Param& param) const;
445 
455  ParameterInformation paramEntryToParameterInformation_(const Param::ParamEntry& entry, const String& argument = "", const String& full_name = "") const;
456 
458 
460  void registerFullParam_(const Param& param);
461 
472  void registerStringOption_(const String& name, const String& argument, const String& default_value, const String& description, bool required = true, bool advanced = false);
473 
480  void setValidStrings_(const String& name, const std::vector<String>& strings);
481 
491  void setValidStrings_(const String& name, const std::string vstrings[], int count);
492 
510  void registerInputFile_(const String& name, const String& argument, const String& default_value, const String& description, bool required = true, bool advanced = false, const StringList& tags = StringList());
511 
525  void registerOutputFile_(const String& name, const String& argument, const String& default_value, const String& description, bool required = true, bool advanced = false);
526 
547  void registerOutputPrefix_(const String& name, const String& argument, const String& default_value, const String& description, bool required = true, bool advanced = false);
548 
561  void setValidFormats_(const String& name, const std::vector<String>& formats, const bool force_OpenMS_format = true);
562 
563 
574  void registerDoubleOption_(const String& name, const String& argument, double default_value, const String& description, bool required = true, bool advanced = false);
575 
581  void setMinInt_(const String& name, Int min);
587  void setMaxInt_(const String& name, Int max);
593  void setMinFloat_(const String& name, double min);
599  void setMaxFloat_(const String& name, double max);
600 
611  void registerIntOption_(const String& name, const String& argument,
612  Int default_value, const String& description,
613  bool required = true, bool advanced = false);
614 
626  void registerIntList_(const String& name, const String& argument, IntList default_value, const String& description, bool required = true, bool advanced = false);
627 
638  void registerDoubleList_(const String& name, const String& argument, DoubleList default_value, const String& description, bool required = true, bool advanced = false);
639 
650  void registerStringList_(const String& name, const String& argument, StringList default_value, const String& description, bool required = true, bool advanced = false);
651 
668  void registerInputFileList_(const String& name, const String& argument, StringList default_value, const String& description, bool required = true, bool advanced = false, const StringList& tags = StringList());
669 
683  void registerOutputFileList_(const String& name, const String& argument, StringList default_value, const String& description, bool required = true, bool advanced = false);
684 
686  void registerFlag_(const String& name, const String& description, bool advanced = false);
687 
695  void registerSubsection_(const String& name, const String& description);
696 
706  void registerTOPPSubsection_(const String& name, const String& description);
707 
708 
711 
712 
721  String getStringOption_(const String& name) const;
722 
731  double getDoubleOption_(const String& name) const;
732 
741  Int getIntOption_(const String& name) const;
742 
751  StringList getStringList_(const String& name) const;
752 
761  IntList getIntList_(const String& name) const;
762 
771  DoubleList getDoubleList_(const String& name) const;
772 
774  bool getFlag_(const String& name) const;
775 
781  const ParameterInformation& findEntry_(const String& name) const;
782 
788  Param const& getParam_() const;
789 
803  void checkParam_(const Param& param, const String& filename, const String& location) const;
804 
815  void fileParamValidityCheck_(const StringList& param_value, const String& param_name, const ParameterInformation& p) const;
816 
832  void fileParamValidityCheck_(String& param_value, const String& param_name, const ParameterInformation& p) const;
833 
841  void checkIfIniParametersAreApplicable_(const Param& ini_params);
843 
845  void printUsage_();
846 
848  virtual ExitCodes main_(int argc, const char** argv) = 0;
849 
851 
852  void writeLog_(const String& text) const;
854 
856  void writeDebug_(const String& text, UInt min_level) const;
857 
859  void writeDebug_(const String& text, const Param& param, UInt min_level) const;
861 
863 
864  ExitCodes runExternalProcess_(const QString& executable, const QStringList& arguments, const QString& workdir = "") const;
866 
869  ExitCodes runExternalProcess_(const QString& executable, const QStringList& arguments, String& proc_stdout, String& proc_stderr, const QString& workdir = "") const;
871 
898  void inputFileReadable_(const String& filename, const String& param_name) const;
899 
910  void outputFileWritable_(const String& filename, const String& param_name) const;
912 
920  bool parseRange_(const String& text, double& low, double& high) const;
921 
929  bool parseRange_(const String& text, Int& low, Int& high) const;
930 
933 
935 
936 
938  void addDataProcessing_(ConsensusMap& map, const DataProcessing& dp) const;
939 
941  void addDataProcessing_(FeatureMap& map, const DataProcessing& dp) const;
942 
944  void addDataProcessing_(PeakMap& map, const DataProcessing& dp) const;
945 
948 
950  DataProcessing getProcessingInfo_(const std::set<DataProcessing::ProcessingAction>& actions) const;
951 
953 
955  bool writeCTD_();
956 
969 
972 
974  static const Citation cite_openms_;
975 
978 private:
979 
985  void addText_(const String& text);
986 
995 
996  };
997 
998 } // namespace OpenMS
999 
const char * tool_name
Definition: SwathWizard.cpp:146
A container for consensus elements.
Definition: ConsensusMap.h:90
Description of the applied preprocessing steps.
Definition: DataProcessing.h:53
ProcessingAction
Definition: DataProcessing.h:59
Exception base class.
Definition: Exception.h:91
static GlobalExceptionHandler & getInstance()
The accessor for the singleton. It also serves as a replacement for the constructor.
Definition: GlobalExceptionHandler.h:88
static void setMessage(const std::string &message)
A required parameter was not given.
Definition: TOPPBase.h:114
RequiredParameterNotGiven(const char *file, int line, const char *function, const String &parameter)
Definition: TOPPBase.h:116
An unregistered parameter was accessed.
Definition: TOPPBase.h:90
UnregisteredParameter(const char *file, int line, const char *function, const String &parameter)
Definition: TOPPBase.h:92
A parameter was accessed with the wrong type.
Definition: TOPPBase.h:102
WrongParameterType(const char *file, int line, const char *function, const String &parameter)
Definition: TOPPBase.h:104
A container for features.
Definition: FeatureMap.h:106
In-Memory representation of a mass spectrometry run.
Definition: MSExperiment.h:73
Class to hold strings, numeric values, vectors of strings and vectors of numeric values using the stl...
Definition: ParamValue.h:55
Management and storage of parameters / INI files.
Definition: Param.h:70
LogType
Possible log types.
Definition: ProgressLogger.h:69
A more convenient string class.
Definition: String.h:60
Base class for TOPP applications.
Definition: TOPPBase.h:146
Param param_inifile_
All parameters specified in the ini file.
Definition: TOPPBase.h:229
StringList getParamAsStringList_(const String &key, const StringList &default_value) const
Return the value of parameter key as a StringList or default_value if this value is not set.
String const ini_location_
Location in the ini file where to look for parameters.
Definition: TOPPBase.h:223
const ParamValue & getParam_(const String &key) const
Return the value key of parameters as DataValue. ParamValue::EMPTY indicates that a parameter was not...
TOPPBase(const String &name, const String &description, bool official=true, const std::vector< Citation > &citations={}, bool toolhandler_test=true)
Constructor.
void inputFileReadable_(const String &filename, const String &param_name) const
Checks if an input file exists, is readable and is not empty.
String const tool_description_
Tool description. This is assigned once and for all in the constructor.
Definition: TOPPBase.h:217
const String & getIniLocation_() const
Returns the location of the ini file where parameters are taken from. E.g. if the command line was TO...
Definition: TOPPBase.h:410
void addEmptyLine_()
Adds an empty line between registered variables in the documentation.
String getParamAsString_(const String &key, const String &default_value="") const
Return the value of parameter key as a string or default_value if this value is not set.
virtual Param getSubsectionDefaults_(const String &section) const
This method should return the default parameters for subsections.
std::ofstream log_
Log file stream. Use the writeLog_() and writeDebug_() methods to access it.
Definition: TOPPBase.h:244
void registerInputFile_(const String &name, const String &argument, const String &default_value, const String &description, bool required=true, bool advanced=false, const StringList &tags=StringList())
Registers an input file option.
Param const & getParam_() const
Return all parameters relevant to this TOPP tool.
void enableLogging_() const
Ensures that at least some default logging destination is opened for writing in append mode.
bool toolhandler_test_
Enable the ToolHandler tests.
Definition: TOPPBase.h:401
Int getParamAsInt_(const String &key, Int default_value=0) const
Return the value of parameter key as an integer or default_value if this value is not set.
Param param_
All parameters relevant to this invocation of the program.
Definition: TOPPBase.h:226
bool getFlag_(const String &name) const
Returns the value of a previously registered flag.
void writeDebug_(const String &text, UInt min_level) const
Writes a text to the log file and to std::cout if the debug level is at least min_level.
std::vector< ParameterInformation > paramToParameterInformation_(const Param &param) const
Translates the given parameter object into a vector of ParameterInformation, that can be utilized for...
void registerStringList_(const String &name, const String &argument, StringList default_value, const String &description, bool required=true, bool advanced=false)
Registers a list of strings option.
ExitCodes runExternalProcess_(const QString &executable, const QStringList &arguments, String &proc_stdout, String &proc_stderr, const QString &workdir="") const
static String topp_ini_file_
.TOPP.ini file for storing system default parameters
Definition: TOPPBase.h:971
void registerIntList_(const String &name, const String &argument, IntList default_value, const String &description, bool required=true, bool advanced=false)
Registers a list of integers option.
std::vector< ParameterInformation > parameters_
Storage location for parameter information.
Definition: TOPPBase.h:257
Param parseCommandLine_(const int argc, const char **argv, const String &misc="misc", const String &unknown="unknown")
Parses command line arguments using parameter definitions from TOPPBase.
double getParamAsDouble_(const String &key, double default_value=0) const
Return the value of parameter key as a double or default_value if this value is not set.
String getParamArgument_(const Param::ParamEntry &entry) const
Utility function that determines a suitable argument value for the given Param::ParamEntry.
virtual ~TOPPBase()
Destructor.
static const Citation cite_openms_
The OpenMS citation.
Definition: TOPPBase.h:974
void registerTOPPSubsection_(const String &name, const String &description)
Registers an allowed subsection in the INI file originating from the TOPP tool itself.
void printUsage_()
Prints the tool-specific command line options and appends the common options.
String version_
Version string (if empty, the OpenMS/TOPP version is printed)
Definition: TOPPBase.h:389
void addDataProcessing_(FeatureMap &map, const DataProcessing &dp) const
Data processing setter for feature maps.
Param param_instance_
Parameters from instance section.
Definition: TOPPBase.h:235
Int const instance_number_
Instance number.
Definition: TOPPBase.h:220
void setValidFormats_(const String &name, const std::vector< String > &formats, const bool force_OpenMS_format=true)
Sets the formats for a input/output file option or for all members of an input/output file lists.
void setMinInt_(const String &name, Int min)
Sets the minimum value for the integer parameter(can be a list of integers,too) name.
void registerIntOption_(const String &name, const String &argument, Int default_value, const String &description, bool required=true, bool advanced=false)
Registers an integer option.
void setValidStrings_(const String &name, const std::string vstrings[], int count)
Sets the valid strings for a string option or a whole string list.
void registerOutputFileList_(const String &name, const String &argument, StringList default_value, const String &description, bool required=true, bool advanced=false)
Registers a list of output files option.
std::vector< Citation > citations_
Papers, specific for this tool (will be shown in '–help')
Definition: TOPPBase.h:398
DataProcessing getProcessingInfo_(const std::set< DataProcessing::ProcessingAction > &actions) const
Returns the data processing information.
void registerDoubleList_(const String &name, const String &argument, DoubleList default_value, const String &description, bool required=true, bool advanced=false)
Registers a list of doubles option.
ProgressLogger::LogType log_type_
Type of progress logging.
Definition: TOPPBase.h:932
void registerFlag_(const String &name, const String &description, bool advanced=false)
Registers a flag.
void setMaxInt_(const String &name, Int max)
Sets the maximum value for the integer parameter(can be a list of integers,too) name.
StringList getStringList_(const String &name) const
Returns the value of a previously registered StringList.
void addText_(const String &text)
String verboseVersion_
Version string including additional revision/date time information. Note: This differs from version_ ...
Definition: TOPPBase.h:392
Param getToolUserDefaults_(const String &tool_name) const
Returns the user defaults for the given tool, if any default parameters are stored in the users home.
bool test_mode_
Test mode.
Definition: TOPPBase.h:968
ExitCodes main(int argc, const char **argv)
Main routine of all TOPP applications.
String const tool_name_
Tool name. This is assigned once and for all in the constructor.
Definition: TOPPBase.h:214
void addDataProcessing_(PeakMap &map, const DataProcessing &dp) const
Data processing setter for peak maps.
TOPPBase()=delete
No default constructor.
String getStringOption_(const String &name) const
Returns the value of a previously registered string option.
void writeDebug_(const String &text, const Param &param, UInt min_level) const
Writes a String followed by a Param to the log file and to std::cout if the debug level is at least m...
void setValidStrings_(const String &name, const std::vector< String > &strings)
Sets the valid strings for a string option or a whole string list.
std::map< String, String > subsections_TOPP_
Storage location and description for allowed subsections from TOPP tool's command-line parameters.
Definition: TOPPBase.h:283
void outputFileWritable_(const String &filename, const String &param_name) const
Checks if an output file is writable.
virtual void registerOptionsAndFlags_()=0
Sets the valid command line options (with argument) and flags (without argument).
DataProcessing getProcessingInfo_(DataProcessing::ProcessingAction action) const
Returns the data processing information.
Param param_common_tool_
Parameters from common section with tool name.
Definition: TOPPBase.h:238
IntList getIntList_(const String &name) const
Returns the value of a previously registered IntList.
Int debug_level_
Debug level set by -debug.
Definition: TOPPBase.h:977
TOPPBase(const TOPPBase &)=delete
No default copy constructor.
IntList getParamAsIntList_(const String &key, const IntList &default_value) const
Return the value of parameter key as a IntList or default_value if this value is not set.
bool official_
Flag indicating if this an official TOPP tool.
Definition: TOPPBase.h:395
Param getDefaultParameters_() const
Returns the default parameters.
void registerOutputFile_(const String &name, const String &argument, const String &default_value, const String &description, bool required=true, bool advanced=false)
Registers an output file option.
void registerDoubleOption_(const String &name, const String &argument, double default_value, const String &description, bool required=true, bool advanced=false)
Registers a double option.
void registerInputFileList_(const String &name, const String &argument, StringList default_value, const String &description, bool required=true, bool advanced=false, const StringList &tags=StringList())
Registers a list of input files option.
Param param_cmdline_
Parameters from command line.
Definition: TOPPBase.h:232
String getDocumentationURL() const
Returns a link to the documentation of the tool (accessible on our servers and only after inclusion i...
void setMaxFloat_(const String &name, double max)
Sets the maximum value for the floating point parameter(can be a list of floating points,...
bool writeCTD_()
Write common tool description (CTD) file.
void setMinFloat_(const String &name, double min)
Sets the minimum value for the floating point parameter(can be a list of floating points,...
static void setMaxNumberOfThreads(int num_threads)
Sets the maximal number of usable threads.
void registerParamSubsectionsAsTOPPSubsections_(const Param &param)
String getToolPrefix() const
Returns the prefix used to identify the tool.
ExitCodes
Exit codes.
Definition: TOPPBase.h:151
@ INPUT_FILE_EMPTY
Definition: TOPPBase.h:156
@ INPUT_FILE_CORRUPT
Definition: TOPPBase.h:155
@ ILLEGAL_PARAMETERS
Definition: TOPPBase.h:158
@ MISSING_PARAMETERS
Definition: TOPPBase.h:159
@ EXTERNAL_PROGRAM_ERROR
Definition: TOPPBase.h:161
@ INCOMPATIBLE_INPUT_DATA
Definition: TOPPBase.h:163
@ UNKNOWN_ERROR
Definition: TOPPBase.h:160
@ EXECUTION_OK
Definition: TOPPBase.h:152
@ INTERNAL_ERROR
Definition: TOPPBase.h:164
@ INPUT_FILE_NOT_FOUND
Definition: TOPPBase.h:153
@ INPUT_FILE_NOT_READABLE
Definition: TOPPBase.h:154
@ CANNOT_WRITE_OUTPUT_FILE
Definition: TOPPBase.h:157
@ PARSE_ERROR
Definition: TOPPBase.h:162
bool parseRange_(const String &text, Int &low, Int &high) const
Parses a range string ([a]:[b]) into two variables (integers)
void registerStringOption_(const String &name, const String &argument, const String &default_value, const String &description, bool required=true, bool advanced=false)
Registers a string option.
virtual ExitCodes main_(int argc, const char **argv)=0
The actual "main" method. main_() is invoked by main().
const ParameterInformation & findEntry_(const String &name) const
Finds the entry in the parameters_ array that has the name name.
std::map< String, String > subsections_
Storage location and description for allowed subsections.
Definition: TOPPBase.h:280
void fileParamValidityCheck_(String &param_value, const String &param_name, const ParameterInformation &p) const
checks if an input file exists (respecting the flags)
double getDoubleOption_(const String &name) const
Returns the value of a previously registered double option.
bool parseRange_(const String &text, double &low, double &high) const
Parses a range string ([a]:[b]) into two variables (doubles)
void checkIfIniParametersAreApplicable_(const Param &ini_params)
Checks if the parameters of the provided ini file are applicable to this tool.
String getSubsection_(const String &name) const
Get the part of a parameter name that makes up the subsection.
void checkParam_(const Param &param, const String &filename, const String &location) const
Checks top-level entries of param according to the information during registration.
void addDataProcessing_(ConsensusMap &map, const DataProcessing &dp) const
Data processing setter for consensus maps.
Param getSubsectionDefaults_() const
Returns a single Param object containing all subsection parameters.
const String & toolName_() const
Returns the tool name.
void registerOutputPrefix_(const String &name, const String &argument, const String &default_value, const String &description, bool required=true, bool advanced=false)
Registers an output file prefix used for tools with multiple file output.
void registerSubsection_(const String &name, const String &description)
Registers an allowed subsection in the INI file (usually from OpenMS algorithms).
ParameterInformation paramEntryToParameterInformation_(const Param::ParamEntry &entry, const String &argument="", const String &full_name="") const
Transforms a ParamEntry object to command line parameter (ParameterInformation).
DoubleList getParamAsDoubleList_(const String &key, const DoubleList &default_value) const
Return the value of parameter key as a DoubleList or default_value if this value is not set.
void registerFullParam_(const Param &param)
Register command line parameters for all entries in a Param object.
void fileParamValidityCheck_(const StringList &param_value, const String &param_name, const ParameterInformation &p) const
checks if files of an input file list exist
ParameterInformation & getParameterByName_(const String &name)
Returns the parameter identified by the given name.
Param param_common_
Parameters from common section without tool name.
Definition: TOPPBase.h:241
Int getIntOption_(const String &name) const
Returns the value of a previously registered integer option.
bool getParamAsBool_(const String &key) const
Return the value of flag parameter key as bool.
DoubleList getDoubleList_(const String &name) const
Returns the value of a previously registered DoubleList.
int Int
Signed integer type.
Definition: Types.h:102
unsigned int UInt
Unsigned integer type.
Definition: Types.h:94
std::vector< Int > IntList
Vector of signed integers.
Definition: ListUtils.h:55
std::vector< String > StringList
Vector of String.
Definition: ListUtils.h:70
std::vector< double > DoubleList
Vector of double precision real types.
Definition: ListUtils.h:62
Main OpenMS namespace.
Definition: FeatureDeconvolution.h:47
Stores Citations for individual TOPP tools.
Definition: TOPPBase.h:72
std::string toString() const
mangle members to string
Definition: TOPPBase.h:79
std::string when_where
suggested format: journal. year; volume, issue: pages
Definition: TOPPBase.h:75
std::string authors
list of authors in AMA style, i.e. "surname initials", ...
Definition: TOPPBase.h:73
std::string title
title of article
Definition: TOPPBase.h:74
std::string doi
plain DOI (no urls), e.g. 10.1021/pr100177k
Definition: TOPPBase.h:76
Parameter entry used to store the actual information inside of a Param entry.
Definition: Param.h:75
Struct that captures all information of a command line parameter.
Definition: ParameterInformation.h:48